top of page

PERMA-MAIN PIPE LINING SYSTEM

THIS IS THE NEXT LEVEL OF PIPELINE REHABILITATION
 

When main lines leak or corrode, they can damage above ground surfaces, cause pollution, and start severe flooding in treatment facilities.  With Perma-LinerTM Main Lining System, we use the most technologically advanced cured-in-place pipe (CIPP) lining to rehabilitate city pipes.

 

Digging causes environmental damage, longer-term traffic disruptions, and is very expensive, but with Perma-LinerTM Main Lining products, there is less disruption, less cleanup, and less cost.

 

Created for municipal main line sanitary sewers, our certified, third-party tested equipment and materials  are engineered and manufactured to meet project specifications on an individual basis.  Our high performance products are consistent in producing results that work, and are very user friendly.

 

Our Perma-LinerTM cured-in-place felt liners are produced with different thicknesses to meet the varying pipe diameters and individual sizes of municipal city lines.  We completely take care of the felt manufacturing process, so the equipment is ready-for-use, as soon as the custom liner is need on site.  We work closely with contractors to make sure all specific job regulations are met, and moderate our product for superior quality control.

 

When we insert our resin impregnated felt liners into the existing host pipe, the resin hardens and creates a structurally lasting pipe within a pipe.  Our robotic camera then goes in to check the work, and ensure the insertion process was successful

 

With Perma-LinerTM Main Lining System equipment and materials, you can expect to completely restore existing pipes, without the above ground disruption associated with traditional digging. Our Trenchless Technology will even extend the life of your existing pipes by at least 50 years, leaving a minimal carbon footprint.

PERMA-LINER END SEAL

Seamlessly molded seal that provides a large sealing surface.

When main lines leak or corrode, they can damage above ground surfaces, cause pollution, and start severe flooding in treatment facilities.  With Perma-LinerTM Main Lining System, we use the most technologically advanced cured-in-place pipe (CIPP) lining to rehabilitate city pipes.

 

Digging causes environmental damage, longer-term traffic disruptions, and is very expensive, but with Perma-LinerTM Main Lining products, there is less disruption, less cleanup, and less cost.

 

Created for municipal main line sanitary sewers, our certified, third-party tested equipment and materials  are engineered and manufactured to meet project specifications on an individual basis.  Our high performance products are consistent in producing results that work, and are very user friendly.

 

Our Perma-LinerTM cured-in-place felt liners are produced with different thicknesses to meet the varying pipe diameters and individual sizes of municipal city lines.  We completely take care of the felt manufacturing process, so the equipment is ready-for-use, as soon as the custom liner is need on site.  We work closely with contractors to make sure all specific job regulations are met, and moderate our product for superior quality control.

 

When we insert our resin impregnated felt liners into the existing host pipe, the resin hardens and creates a structurally lasting pipe within a pipe.  Our robotic camera then goes in to check the work, and ensure the insertion process was successful

 

With Perma-LinerTM Main Lining System equipment and materials, you can expect to completely restore existing pipes, without the above ground disruption associated with traditional digging. Our Trenchless Technology will even extend the life of your existing pipes by at least 50 years, leaving a minimal carbon footprint.

While we at Perma-LinerTM manufacture superior quality liners, we also make ourselves available to our clientele to help them with questions and problems they face along the way.  Whether you are a municipality, small or large contractor, or anyone else looking for a superior product and/or service, we will help with the unique challenges presented with each lining situation.

We highly value building customer trust, and know it serves as a fundamental cornerstone for our growing industry.  We make ourselves available to our clients, offering expert guidance and knowledge to make each lining a success.  With Perma-LinerTM, we offer a superior product, expert knowledge, and we get the job done fast.  It is that simple.  Less cost, less cleanup, and less hassle from a company you can count on.

PERMA-Main ADVANTAGES

Features & Benefits of our Perma-Main System

 

  • 100% Trenchless

  • Formulated Epoxy

  • ResinsRe-Line 22's, 45's & Sweeping 90's

  • NSF Standard 14 Approved

  • Eliminate Root Intrusion

  • Bridge Missing Pipe Sections

  • Increase Flow Efficiency

  • Minimum Design Life 50 Years (Tested)

  • Non-Woven / No Stretch Liner

  • Single Point of Access for Lining

  • Seal Open Joints

  • Prevent Pipe Failure

  • Reline 4" to 6" Transitions

  • Stop Infiltration / Ex-Filtration

  • IAPMO Certified

PERMA-LATERAL SPECIFICATIONS

Consistent Installations!

 

Perma-Liner™ Industries, Inc. has spent years of research and development in order to furnish you quality materials and proven installation methods. Both municipal government agencies and private owners of building sewer laterals expect this quality in every project. To ensure this quality is consistent in every application, Perma-Liner™ has installation and material specifications for our Perma-Lateral™ Certified Installers to follow. The specifications are used by municipal government agencies throughout the world for contracting services.Our Perma-Lateral™ 3rd party testing exceeds the industries standards as per ASTM F1216. The installation practices set forth in our specifications will guarantee your company or agency consistent results…every time!Please contact us for an up-to-date list of Perma-Lateral™ Certified Installers in your area.

bottom of page